Advantages
(1) The use of ceramic valves can enhance the sealing performance of industrial pipeline systems, and will play a positive role in promoting environmental protection. 
(2) The raw materials for manufacturing ceramics are diverse and inexpensive, which can significantly reduce the consumption of metal materials and rare mineral resources. 
(3) By using advanced high-tech new ceramic structural materials to manufacture the sealing and vulnerable parts of the valves, the wear resistance, corrosion resistance and sealing performance of the valves have been enhanced, significantly prolonging the service life of the valves. 
(4) The use of ceramic valves can significantly reduce the frequency of valve maintenance and replacement, enhance the stability of the supporting equipment operation system, alleviate the labor intensity of workers, and save equipment repair costs. 
(5) The use of ceramic valves can enhance the sealing performance of industrial pipeline systems, and at the same time, it can effectively prevent leaks to a great extent, thereby playing a positive role in promoting environmental protection. 
(6) The raw materials for manufacturing ceramics are diverse and the cost is low. By using common elements such as aluminum, carbon, and silicon, superior ceramic materials can be produced, which can save a large amount of metal materials and rare mineral resources. 
How to extend the service life?
1. Clean the pipeline
The welding slag, rust, lime slurry solidified residue, iron wires, cloth strips, etc. in the pipeline, if they accumulate at the throttling or guiding parts, will cause the ceramic valve to be clogged or stuck, and the valve core may break. 
2. Increasing the Diameter
  Under the same flow rate, the smaller the diameter of the ceramic valve port, the faster the flow velocity of the fluid, and the more severe the erosion of the fluid on the ceramic valve core and sealing components will be. 
3. Transfer the damaged area
Move the severely damaged part of the ceramic valve to a secondary position to protect the sealing surface and throttling surface of the valve core and valve seat.
4. Change the valve structure
To make the structure of the ceramic valve more reasonable, it has been changed to the currently commonly used three-piece structure. 
5. Increase the opening degree for operation.